Flex 3000 Firewire cable question
Does the 3000 come with a firewire cable? If not, does it just use a normal 6-pin connector?Tnx,Kerry, WD5ABC
View ArticleUnable to get CW get , MPR40 and CW skimmer to work
I tried the settings that are posted in the Knowledge center. No good. Please Help
View ArticleFirewire driver problem
I just got back from Austin with my new F3k! I've got a problem, and I found somebody with a F5k with the same problem but I've tried the steps in the forum (and release notes) several times with the...
View ArticleFlex 3000 and externel mixer
I would like to use a mic that needs a mixer to work. Is there a way to connect my Eurorack 6 channel mixer to my Flex 3000. The mixer has RCA jacks for audio out,,,thanks
View ArticleFlex 3000 Noise.
Hello everyone,I have perused the "Subjects" and without reading every one I have not found a related subject title, what I would like to ask is what level of noise do others get (attempting to...
View ArticleCW Zero Beat button question
I'm running PSDR 2.1.5 and have noticed something strange (to me, anyway) when I click the 0 Beat button. I can be tuned to a CW signal, click the zero beat button and it centers the signal in the...
View ArticleFlex 3000 and VAC
Hi to all, my first posting on here so please take this into account :-)). Recently qualified here in England as M6AQL i have taken the plunge and this week bought a Flex 3000 and a Flex 1500. I have...
View ArticleBlower Noise reducing
Hi,is it possible to reduce Blowers noise?It is not very comfortable sitting beside the SDR with such a noisy blower.So wonder if the blower could be switched off during receive or at least reducing...
View ArticleZero Beat ?
Running v2.22Zero beat button not active (dimmed)In owners manual page 55 "Note: 0 beat is only available if AVG is enabled for the Display"What´s the meaning of "AVG" and how can I activate "0 beat"...
View ArticleFlex 3000 Purchase ?
I hope I don't offend any Flex owners as I am not trying too.I recently have been really messed over by Yaesu with an FT-2000 I bought new back in Feb 2011 long story but there is a bad design flaw and...
View ArticleFlex 3000 - cw signals
Failure or normal ?using Windows 7 and can hear with PC speaker CW signals (not at FLEX 3K output)For example : Tuned to 7020kc, (Flex 3K) Signal is on PC 9Kc below.Any Idea ?Uwe
View ArticleClamp on ferrite sources
I understand there are certain mixes that are recommended ie 31, but what is a source to buy them in the States. All my local Radio Shack understands is cell phones these days!
View ArticlePSDR 2.2 Display issues with XP
I have an XP SP3 based computer with a Flex 3000. With any version of PSDR 2.x my display is not correct. It is hard to explain but it shows up as a ghost image. For instance on the start up the bannr...
View ArticleIdeas for Power SDR improvements
Bonjour from Bordeaux, France,Just ideas to improve the use of the Power SDR flex3000.- Preseted split value : With a value we can chose in the menu- memory for each band and sub band : Very usefull,...
View ArticleFlex-3000 Power Relay Not Engaging
I'm wondering if anybody out there has experienced this problem. When I turn on my Flex-3000 I no longer hear the power relay engage and the computer no longer recognizes the radio. It work the night...
View ArticleCan I use HRD with Flex 3000
Wanting to move from my Yaesu ft-1000mp Mark-V - however my log is in HRD and I use the DX cluster that when selecting a station it changes radio to the freq. Everything is working good and I will be...
View ArticleHelp improving voice signal quality on TX
OK, please bear with me, a totally new ham - just got my call sign today. The Flex 3000 is my first radio and, although I am a longtime computer nut, all this is very new to me.I got the nerve to...
View ArticleFlex demo mode - live recording available?
Hi Folks,I'm almost ready to pull the trigger on a Flex 3000.I've just downloaded Power SDR (latest version) and launched it in Demo mode.I ubderstand that the Flex Radio can record a complete 96khz...
View ArticleFlex-3000 ATU fails to tune
I have a Flex-3000 that was working perfectly yesterday. I made a few RTTYcontacts using the Flex-3000 and DM780 during the WW RTTY contestToday when I tried to do some PSK31, the ATU failed to tune...
View ArticleSimple use of the Flex3000?
I have been lurking here and other Flex boards. Although I have learned a lot about the capabilities of the 3000, I am amazed at the complex operations some operators do. All kinds of specialized...
View Article