DDS Calibration
Hi,I'm wondering about the wandering behavior in the Flex-3000 DDS... Here are two pics taken after accurate calibration, showing that the F3K attains about +/- 0.2 ppm accuracy, or about 2 Hz wander...
View Articlefirewire suddenly wont connect to3000
hi, have a flex3000 worked fine then suddenly firewire stopped working, ots working fine frm pc but radio will not connecttried new reinstall but nothing connectsanyone help?mhazy
View ArticlePowerSDR 2.0.8
Hi,Can someone tell me where to find the firmware for my F3K to run PowerSDR 2.0.8.At this moment i run 1.2.5.6. After the install i get ann error message from 2.0.8 to upgrade my firmware too2.0+73Pat...
View ArticleFirmware 2.0.0.0 - 2.0.0.8 (Flex-3000) binary files needed
Dear friends,I'm looking for firmware 2.0.0.0 - 2.0.0.8 (Flex-3000) binary files.There's no chance to find them in "flexradio.com downloads"I'll be very grateful to all who can help me by e-mailing one...
View ArticleFailure to upload new firmware (psd_2.0.8)
Hi allI'm owner of a FLEX-3000 and tryiing to intall the new program (2.0.8 beta).Everything is OK until the time to upload the new firmware, it refuse to upload it.Giving me this message : (File info:...
View ArticleNew 3000 Owner
Just bought new 3000. It arrived on Friday. It installed and worked with no problems. Using with Dell Intel quad system.Have made 6+ contacts with good audio reports. Just starting to feel comfortable...
View ArticleCan I Save Transmit Equalizer settings?
I am running SDR 2.0.16. I have set the transmit equalizer per Heil setup suggestions, but I do not see a way to save the settings. Is there a way to do that so if I do an unexpected exit that I do not...
View ArticleDSP and ANR and filter configuration
I see that there are default settings that are in place for DSP, ANR and the various filters. Is there some guidance in making changes to improve them for my particular setup? I am interested in SSB...
View ArticleSDR Skins and Color Adjustments?
Greetings all-I think I have my new 3000 working fairly reliably now... and I was wondering- is there a SDR skin editor?The color adjustments don't allow you to change the over-all console color- or...
View ArticleTips for 3K users with Laptops
Greetings all-This is for users of laptops - which are much more challenging to get going that a "tower" PC.Background: Built-in Firewire ports on Laptops normally share an IRQ - an "interrupt" - with...
View ArticlePartial displays
I am running a 3000 on an Hp desktop.On any of the displays such as START, BYP, NR, SR, AVG, 40, LSB and 2.1k or any other displays that I click on there is a partial indicator (blue) of about one...
View ArticleLenovo Laptops "FIX" for use with Flex 3000
OK guys-Here it is: For Lenovo Laptops with a firewire port, this is what you have to do:[u]Tested with Windows 7 Pro 64 on a Lenovo T410 I-5 laptop[/u]1. Confirm the firewire port is a Ricoh 1394 in...
View ArticleMixW sound problem
HiMy SDR flex-3000 don't work width MixW v.3.01 and Digital RTTY and PSK31.Message: The sound card yoy have chosen (flex radio) is already in use or not exist or dos not support 16 bit wave format...
View ArticleCarrier / Spur at edge of passband...normal?
OK 3000 guys - My 3000 has a low carrier at the red frequency marker inside the 20, 15, 12 ,10 and 6 meter bands. As I move around- if I'm QSY'ing down in USB, the carrier passes through the filter...
View ArticleAdding (CTCSS) PL Tones to F3k
I,m aware of the potential addition of PL tones (CTCSS) to Flex radios in future updates, Has anyone added PL Tones to their rigs by any other method, such as outboard "Com-spec unit" or software, Thanks
View ArticleExternal keying line active all the time
I have a Flex-3000. I connected the external keying line to my Ameritron AL-80B. However when I have the flex in RX and switch the amp to Operate, it immediately goes into transmit mode. When I key the...
View ArticleTransmissting an echo (reverb)
I bought my Flex 3000 in October 2009 and it has been back to the repair shop before Christmas for no output power and was repaired under warranty. Since receiving it back I have had...
View ArticleVSP Manager with HRD.
I have a week old F3K running the Beta PowerSDR on a DELL Intel i5 with Win7 64-bit and 8Gb RAM. Managed to get the SDR to operate on CW and SSB but trying to get HRD & DM780 to work has been a...
View Articlepower sdr looking for driver?
Iam waiting for my Flex 3000 and thought I would play with the demo mode. I was playing with the audio inputs and out puts for an sound blaster live card.I then closed the program and restarted it and...
View ArticleFoxhole ASIO Driver?
Hi I have been trying to useSDR in demo mode. But it stops loading and says I need the Foxhole ASIO driver and try agian. I have no foxhole product in my computer so I wounder why it thinks it is...
View Article